Printing a family history book
In short: What 300 DPI and 3 mm bleed mean, which printer to choose, why page counts round to multiples of four, and why matte beats gloss for old prints.
There is no publisher in this process. You write it, arrange it, export a PDF, and take that PDF to a printer. Which is why the file has to be right before it goes anywhere.
What a print-ready file needs
Pianyu exports US Letter, 300 DPI, 3 mm bleed on every page. Those three numbers are what a print shop asks for, and they are not decoration:
- 300 DPI is the resolution at which a photograph stops looking soft at reading distance. Below about 240 DPI, faces go slightly plastic; above 300 you are paying for pixels nobody can see.
- Bleed means the artwork runs 3 mm past the trim line, so that a small misalignment in the cutter leaves no white sliver at the edge. Without bleed, one page in twenty has a white hairline along the bottom.
- US Letter (8.5 × 11 in) is the size the engine lays out for. A printer can scale to A4, but then the margins change with it.
Choosing a printer
Three kinds, in ascending order of how much you have to explain:
- A local shop that prints books. Walk in with a USB stick, ask to see a bound sample of the paper you're considering. This is the one to choose if it's your first time.
- An online printer with a book product. Upload the PDF, pick softcover, matte, perfect-bound. Cheapest per copy, and reprints are easy.
- A photo lab. Fine for a thin, saddle-stitched booklet; not for forty pages, which need a spine.
Ask for a proof — one printed copy — before ordering ten. A proof costs a fraction of the run and catches the things a screen hides: captions too small, skin tones too warm, a photograph that was actually 72 DPI and looked fine on a monitor.
Things printers will tell you
- Page count in multiples of four. Booklets are printed on large sheets folded in fours; a 38-page file becomes 40 with two blanks, or gets padded. Round up deliberately rather than letting the shop add blanks at the end, where a blank page looks like an error.
- Matte, not gloss. Old photographs look worse on gloss: scratches, fingerprints and reflections all get amplified. Matte also takes pencil and pen, if you want to write in the copy you keep.
- Inside margins. Perfect-bound books lose 5–10 mm of the inner edge to the spine. If a caption sits hard against the gutter it disappears into it. Pianyu's layouts keep the margins wide for this reason; don't tighten them.
- Weight matters. 120–150 gsm matte is right for a family book: heavy enough not to show the photograph on the other side, light enough that the book doesn't fight being opened.
What to hand over
Give the printer the PDF and nothing else. Not a Word file, not a folder of photographs, not a link. A PDF is fixed: what you approved is what they print, on any machine, in any city.
Name it so it can be found again: surname-title-2026-print.pdf.
Print locally when the reader is elsewhere
If the book is for someone in another city, send the PDF to a printer near them and let them collect it. Shipping a book across a border costs more than printing it twice and risks the thing arriving bent.
Runs
Two copies is the usual order: one to give, one to keep. Five is for siblings. Twenty is a reunion, and at that point ask the printer for a bulk price — it drops sharply past about ten.
What we don't do
We don't print, bind or ship, and we don't collect a delivery address. The deliverable is the file: a print-ready PDF that opens at any print shop that accepts a PDF.
Fragments first, stories second, a lifetime last. Why we built it